Chapter 2: Installation
Note 1: If you had ever installed the other Wireless Cards before, please uninstall
the existed drivers and utilities first.
Note 2: The installation below is performed in Windows XP system. The
installations in Windows 2000 and Vista are similar.
1. Insert the USB wireless network card into an empty USB 2.0 port of your computer when
computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the
card over and try again.
2. The system will find the new hardware and display the below message. Click “Cancel” to
skip.
To Next Page
Loading...
Need help?
General
