Turn on CCKM: Check this box to enable CCKM (Cisco
Centralized Key Management), which enables wireless clients to
roam between CCKM-enabled access points in very short time.
Enable Radio Measurements: When you’re connecting to
CCX-compatible access point, check this box to enable radio
measurement function to improve wireless connectivity.
Non-Serving Channel Measurements Limit: When you’re
connecting to CCX-compatible access point, check this box to
enable measurement on unused radio channels to improve
wireless connectivity.
After you finish the settings, click ‘Apply’ to apply new settings, and click ‘OK’ to close
configuration utility.
To Next Page
Loading...
Need help?
General
