Country Region Code
Available options are 0-7, which will affect the available
wireless channels you can use:
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
The operating frequency channel will be restricted to the
country / region user located before importing
Beacon (ms) You can define the time interval that a beacon signal should be
send. Default value is 100. Do not modify this value unless you
know what will be affected
TX Power You can select the wireless output power here. Please select a
proper output power setting according to your actual needs.
You may not need 100% of output power if other wireless
clients are not far from you.
Idle Time Select the idle time of your wireless network card. Default
value is 300. Do not modify this value unless you know what
will be affected
No forwarding among wireless
clients
Check this box and wireless clients will not be able to share
data with each other.
Hide SSID
Check this box and the SSID will not be broadcasted to the
public. Your wireless clients must know the exact SSID to be
able to connect to your computer.
This option is useful to enhance security level.
Allow BW 40MHz Check this box to allow BW 40MHz capability.
Default Click this button to restore all settings in this page back to
default value.
Tx BURST Check this box to accelerate the data transmit rate. It may not
work with all wireless access point and wireless devices.
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all values to factory
default value.
To Next Page
Loading...
Need help?
General
