Parameter Description
Access Policy
Select the policy type of your access rule:
Disable: Allow any wireless client with proper
authentication settings to connect to this access point.
Allow All: Only allow wireless clients with MAC address
listed here to connect to this access point.
Reject All: Reject wireless clients with MAC address
listed here to be connected to this access point.
MAC Address Input the MAC address of the wireless client you wish to
allow or reject here. No colon (:) or hyphen (-) required.
Add
dd the MAC address you inputted in ‘MAC address’ field to
the list.
Delete
Please select a MAC address from the list, then click
‘Delete’ button to remove it.
Remove all Delete all MAC addresses in the list.
When you finish with setting and want to save changes, click ‘Apply’ button.
To Next Page
Loading...
Need help?
General
