Planet XGS-6320-8UP4X - Recovering To Default Configuration

15
5.RecoveringtoDefaultConguration
 IP address has been changed or admin password has been forgotten –
To reset the IP address to the default IP address “192.168.0.100” or reset
the login password to default value, press the hardware-based reset button
on the front panel for about 10 seconds. After the device is rebooted,
you can log in the management Web interface within the same subnet of
192.168.0.xx.
Reset
Console
115200, N, 8, 1
10
9
12
11
14
13
16
15
Reset Button
Figure 5-1: Reset Button