EasyManuals Logo

Planet XGS-6320-8UP4X User Manual

Planet XGS-6320-8UP4X
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
2. Requirements
z Workstations running Windows 7/8/10/11, MAC OS 11 or later, Linux,
UNIX,orotherplatformsthatarecompatiblewithTCP/IPprotocols.
z WorkstationsareinstalledwithEthernet NIC(NetworkInterfaceCard)
z Serial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator,
such as Tera Term or PuTTY.
Serial cable -- one end is attached to the RS232 serial port, while the
otherendtotheconsoleportoftheManagedSwitch.
z Ethernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45 connec-
tors.
TheabovePCisinstalledwithWebbrowser.
It is recommended touse the latest Chrome version that works
withyourworkstationtoaccesstheManagedSwitch.If theWeb
interface of the Managed Switch is not accessible, please turn
offtheanti-virussoftwareorfirewallandthentryitagain.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Planet XGS-6320-8UP4X and is the answer not in the manual?

Planet XGS-6320-8UP4X Specifications

General IconGeneral
BrandPlanet
ModelXGS-6320-8UP4X
CategorySwitch
LanguageEnglish

Related product manuals