Plantronics 220 - ADDITIONAL FEATURES; INDICATOR LIGHTS

8
ADDITIONAL FEATURES
Redialling Last Number
To activate last number redial,
double press the call control
button. You will hear a high tone
after each key press.
Using Voice Dialling
With the headset on, press and
hold the call control button for
2 seconds to activate the voice
dialling.
NOTE To use voice activated
dialing, the voice dialling feature
must be enabled on your phone.
See your Bluetooth phone manual
for instructions.
Rejecting a Call
When receiving an incoming call,
press the call control button for
2 seconds to reject the call.
Switching a Call From Phone to
Headset
To switch an active call from your
phone to your headset, press the
call control button for 3 seconds.
Switching a Call From Headset
to Phone
To switch an active call from your
headset to your phone, press the
USING YOUR HEADSET
INDICATOR LIGHTS
Headset Status Headset Indicator Light
Powering on Blue flashes. Repeat.
Powering off Red appears and goes off.
Charging battery Red solid light.
Low battery Red flashes.
Pairing mode Blue/red flashes.
Missed call Purple flashes. Single press the call control
button to cancel.
Ringing Purple flashes. Briefly press call control button
to answer the call. Press call control button for
2 seconds to reject the call.