Plantronics BackBeat Pro - Connecting Your Headphones; Bluetooth Pairing; NFC Pairing

The first time you power on your headphones the pairing process begins.
NOTE If your phone supports Near Field Communication (NFC) go to NFC pairing (Android).
1
Holding your headphones, slide the power switch to the on position. The headphone LEDs
flash red and blue.
R
2
Activate Bluetooth
®
on your phone and set it to search for new devices.
•
iPhone
®
Settings > Bluetooth > On*
•
Android
™
Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3
Select “PLT_BBTPRO.”
Once successfully paired, the headset LEDs stop flashing.
1
Ensure NFC is on and your phone’s display is unlocked. (Phones may vary.)
2
Tap and hold the headphones to the phone’s NFC tag location until NFC pairing completes. If
necessary, accept the connection.
NOTE The headphone’s NFC tag is located on the outside of the left ear cup. (Phone tag locations
vary.)
L R
Get Paired
NFC pairing (Android)
5