Plantronics CA12CD/A User Manual

REMOTE
CHARGE
SPARE
CHARGE
BASE
POWER
TALK
TALK
VOLUME
BASE UNITREMOTE UNIT
Quick Disconnect™
for headset
Listen (receiving)
fine-adjust
volume control
Remote
on-off button
and
indicator
Push-to-
talk
button
Selector for
momentary-or-
locking PTT
function
Battery
pack
Battery-charging
contacts
Talk (sending)
fine-adjust
volume
controls
PTT indicator
(green)
Remote unit
battery charging
indicator (orange)
Spare
battery pack
charging
indicator
(orange)
Base unit
power indicator
(green)
Charging well for
remote unit
Charging well for
spare battery pack
Console
interface cable
AC adapter
BOTTOM VIEW
OF BASE UNIT
Talk (sending)
coarse-adjust
volume control
Note: The factory
settings provide a
carbon-microphone
output level.
Listen (receiving)
coarse-adjust
volume control
Note: When the battery pack is
installed or changed, the on-off
indicator will begin to flash as soon
as the unit is ready for use. This may
require about 45 seconds while the
remote unit determines and selects
the most reliable radio channel.
USER GUIDE
COMPONENTS OF MODEL CA12CD/A
Push-to-talk headset amplifier
REMOTE
CHARGE
SPARE
CHARGE
BASE
POWER
TALK
TALK
VOLUME
Model CA12CD/A
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Plantronics CA12CD/A Specifications

General

Brand	Plantronics
Model	CA12CD/A
Category	Headsets
Language	English

Summary

Components of Model CA12CD/A

Remote Unit Components Overview

Diagram labeling key parts of the remote unit including buttons, indicators, and connectors.

Base Unit Components Overview

Diagram labeling key parts of the base unit including charging wells, indicators, and controls.

Battery Pack Charging Indicator

Note detailing the on-off indicator behavior during battery pack installation or change.

Setup Guide

Connecting Console and Power

Steps for connecting the console interface cable and AC adapter to the base unit.

Installing Battery Pack and Headset

Procedure for sliding the battery pack onto the remote unit and attaching a headset.

Unit Placement

Recommendation for placing the unit away from CRT monitors to avoid interference.

Battery Charging and Management

Charging Procedure

Instructions for inserting the remote unit and spare battery pack into charging wells.

Battery Charge Indicators

Explanation of charging indicator behavior and fully charged status.

Battery Care and Usage

Guidance on maximizing battery life and initial charging requirements.

Safety and Handling Notes

Important notes regarding PTT button release and charging contact precautions.

Device Operation

Powering On and Off

Steps for turning the remote unit on and off, including indicator behavior.

Using the Push-to-Talk Button

How to use the PTT button to signal the console or radio and its talk indicator.

PTT Button Lockable/Non-Lockable

Instructions on how to adjust the PTT button for momentary or locking operation.

Audio Performance Tuning

Guidelines for setting audio levels for optimal performance and call clarity.

Subscription Process

Procedure for pairing the remote unit with the base unit if subscription is lost.

Controls and Indicators

Remote Unit Controls

Detailed descriptions of the remote unit's push-to-talk button and volume controls.

Base Unit Controls

Detailed descriptions of the base unit's volume controls and PTT status indicator.

Visible Indicators

Explanation of remote and base unit indicators, their colors, and meanings.

Error Condition Indicators

Guides to interpreting audible beeps and visual indicators for error states.

Technical Information and Support

RF Exposure Statement

Information regarding radio frequency exposure limits and device compliance.

Technical Assistance

Contact information for technical support and website resources.

Supplies and Accessories

List of available accessories like AC adapters, cables, and battery packs.

WEEE Disposal Information

Guidance on proper disposal of electrical and electronic equipment.