3
2
WELCOME
This Product Information Booklet contains
information not described in the Quick Start
Guide* (QSG). The QSG should be used to set
up your CS50 Wireless Office Headset System.
BASICS
Installation . . . . . . . . . . . . 2
Location . . . . . . . . . . . . . . 3
Headset/Handset Mode . . . 3
Placing and Receiving
a Call Using Headset . . . 4
Placing and Receiving
a Call Using Handset . . . 4
FEATURES
Out of Range Warning . . . 5
Low Battery Warning . . . . . 5
Recharging Headset . . . . . 6
Replacing Battery . . . . . . . 6
OPTIONS
Optional Handset
Lifter Use . . . . . . . . . . . . . 7
IntelliStand
TM
Function. . . . . 8
Switching to Handset . . . . . 8
TROUBLESHOOTING . . . . 9
TECHNICAL SUPPORT . . 11
SUBSCRIPTION. . . . . . . . 12
SYSTEM RESET . . . . . . . . 13
MAINTENANCE. . . . . . . . 13
PARTS & ACCESSORIES . . 14
LOCATION
Do not position the CS50 system near other
electronic equipment. Incorrect positioning
can cause problems with noise or
interference.
HEADSET/HANDSET MODE
Pressing the talk button *on the headset
selects headset mode. The talk indicator
on the base unit will illuminate green and
the talk indicator light on the headset
will also illuminate when in headset mode.
Both of the indicators are off
when in handset mode.
* Callouts have been first identified
in the Examine Component
section of the QSG.
By selecting
handset mode
after completing
your call, you
will conserve the
headset battery
power and extend
the remaining
available talk time.
You can achieve
this by pressing
the talk button
immediately on
conclusion of
the call.
INSTALLATION
Please install the CS50 Wireless Office Headset System in
accordance with the instructions detailed in the QSG.
BASICS
BASICS
TALK
BUTTON
TIP
*This Product Information Booklet and Quick Start Guide are
available on-line at www.plantronics.com/documentation.
To Next Page
Loading...
