1. Briefly press the base subscription button while the base has an active link.
2. Press the guest headset volume up button until the indicator light turns on.
3. When the base subscription LED stops flashing white and remains solid white, the request to join will be heard
in the primary user's headset and the primary user will have to press their call button within 10 seconds to
accept the guest.
How to exit a headset conference
Guests headsets can remain as guests through multiple calls. To remove a guest headset, press the guest
headset's call control button or dock the primary user's headset in the charge cradle. A single tone sounds in the
master headset as each guest leaves the call.
CS500 SERIES DATE CODE LOCATION
The Date Code for the CS500 Series is located on the label on the bottom of the base, and consists of four digits
(MMYY).
5
To Next Page
Loading...
