Plantronics CS500 Series Fact Sheet

CS500 SERIES: HOW TO SET UP THE HL10 LIFTER
The HL10 handset lifter automatically lifts the hand receiver of your phone when you press the call control button
on your headset. Follow the instructions below to set up an HL10 with your CS500 Series system.
PROCEDURE
You will need:
To set up the handset lifter:
1. Unplug your phone's handset.
2. Plug one end of the telephone interface cable (TIC) into the phone's handset port and the other end into
the back of the CS500 series base.
3. Plug your phone's handset cable into the box in the middle of the TIC.
4. Firmly press the handset lifter power cord into the handset lifter jack.
5. With the phone's handset on the hook, slide the
handset lifter arm under the handset until the lifter
base touches the side of the phone and the handset
earpiece (see below).
2

Plantronics CS500 Series Specifications

General

Talk Time	Up to 9 hours
Technology	DECT 6.0
Noise-Canceling Microphone	Yes
Connectivity	Wireless
DECT Security Certification	Yes
Wireless Range	Up to 350 feet
Wearing Style	Over-the-head