• Be sure you turn on the microphone by pressing the long button on the
outside of the head-worn unit – this will result in the green light on top of the
CS70N base unit illuminating
• Because the sound coming from the CS70N may be a bit different from sound
originating from standard microphones, we have found that it is best to create
a new user profile on Dragon. After doing so, you will observe outstanding
accuracy when using the CS70N
2. With your telephone:
• In order to answer a call be sure the rocker switch is pushed toward the right
(telephone position), be sure you have turned on the wireless microphone by
pressing the long button on the outside of the wireless unit, and then simply
lift your receiver from the cradle.
•
If you have connected by means of a modular “headset” jack on your
telephone (described above), simply activate the “headset” button on your
telephone to answer or place a call.
Good luck. Please call Speech Recognition Solutions with any questions pertaining to
the set-up and use of this system.
To Previous Page
Loading...
Need help?
General
