13
IN SITU ASSEMBLY
ý this method of assembly may be carried out by one person
ý it is not necessary to dismantle anything at the masthead
Steps to be followed:
MEASURING THE LENGTH OF THE FORESTAY
- In order for this jib reefing system to be perfectly adapted to your boat the length « X » needs to be known.
Helpful hint:
- Slide a small shackle around the forestay
- Ensure that it lies flush against the sleeve
- Slacken the backstay
- Secure the mast with a halyard
- Dismount the lower part of the forestay
- Assemble the drum unit
- Reassemble the lower part of the forestay
- Undo the halyard and tighten the backstay
X
To Next Page
Loading...
Need help?
General
