EasyManua.ls Logo

pleasant hearth GLF-2308 - User Manual

pleasant hearth GLF-2308
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
HOMEOWNER’S INSTALLATION AND OPERATING INSTRUCTIONS
PLEASANT HEARTH ELECTRIC FIREPLACE INSERT
MODEL/MODELE/MODELO #GLF-2308 / 23-800-001 / GEF23TRG18/
28-800-001 / GLF-2808 / GEF28TRG18
For installation with
Pleasant Hearth
Fireplace Mantel
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 877-447-4768 8:30 a.m. – 4:30 pm CST, Monday – Friday.
or email us at customerservice@ghpgroupinc.com
20-10-171 Rev.4/13
C US
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY,
AN ELECTRICAL SHOCK OR FIRE MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
IMPORTANT INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE
Français p. 19
Español p. 39
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768

Questions and Answers

  • J
    Jennifer SmithAug 10, 2025
    Why is my pleasant hearth GLF-2308 Indoor Fireplace not turning on?
    • M
      Michael BellAug 10, 2025
      Your Pleasant Hearth Indoor Fireplace might not be turning on for several reasons. First, ensure the fireplace is properly plugged into a working 120V outlet. Check your circuit breaker or fuse box, as a tripped breaker or blown fuse could be the issue; ideally, the fireplace should be on its own 15-amp circuit.
  • U
    usmallAug 20, 2025
    What to do if the heater is not operating on my Pleasant Hearth Indoor Fireplace?
    • C
      christinebaileyAug 20, 2025
      If the heater on your Pleasant Hearth Indoor Fireplace isn't working, first, ensure you are operating it correctly by reviewing the instructions. Make sure the safety switch is in the "ON" position. Also, the thermostat may have been satisfied, so increase the desired room temperature on the control panel or remote. Finally, if the sliding door is dirty or clogged, unplug the unit, clear the door area of dust and debris, wait five minutes, plug the unit in again, and turn on the heater.
  • S
    slamAug 31, 2025
    What to do if my pleasant hearth GLF-2308 is making excessive noise when the flame is on but the heater is off?
    • L
      langmaryAug 31, 2025
      If your Pleasant Hearth Indoor Fireplace is making excessive noise when the flame is on but the heater is off, the rotating flame reflector shaft might be rubbing against the housing. Turn off the unit, open the back of the firebox, and try repositioning the flame reflector shaft.

pleasant hearth GLF-2308 Specifications

General IconGeneral
ModelGLF-2308
TypeIndoor Fireplace
Number of Burners1
Vent TypeVent-free
MaterialSteel
FinishBlack
Heating Area1, 000 sq ft

Related product manuals