To Next PageTo Next PageWhat to do if my pleasant hearth Fireplace Accessories log set does not turn on?
If the pleasant hearth Fireplace Accessories log set isn't working and the power light is off, here's what to check: * First, ensure the log set is properly plugged into a working 120V outlet. * Next, verify that the circuit breaker hasn't tripped or a fuse blown. Ideally, the log set should be on its own 15-amp circuit.
What causes excessive noise when the heater is operating in pleasant hearth Fireplace Accessories?
If your pleasant hearth Fireplace Accessories is making excessive noise when the heater is operating, the blower might be dirty or clogged.
General| Model | LH-24 |
|---|---|
| Fuel Type | Electric |
| Heating Capacity | Up to 400 sq. ft. |
| Voltage | 120V |
| Thermostat | Yes |
| Remote Control | Yes |
| Power | 1500W |
| Amperage | 12.5 Amps |
Read and understand all safety rules and warnings before assembly, operation, or installation.
Guidelines for proper electrical connection, grounding, and avoiding shock hazards.
Instructions and warnings for handling the remote control battery.
Detailed measurements and technical specifications for the electric log set.
Lists the components included in the electric log set package.
Instructions on placement, clearances, and unpacking the electric log set.
How to use the log set controls via the panel and the remote.
Explanation of full-featured and visual effect operating modes.
Guidance on maintaining the motors for the fan heater and flame blower.
Instructions on how to clean the log set safely and effectively.
