SECTION OF REAR PANEL SHOWING RCA AND XLR INPUTS
RCA inputs are the most commonly used and are found on virtually all preamplifiers or other ancillary
equipment. For normal STEREO use, connect the left channel output of the preamplifier to the left
channel input of the SA-50 and the right channel output of the preamplifier to the right channel input of
the SA-50
SELECT "RCA STEREO" on the ACS
( Amplifier Configuration Selector ). See page 9.
XLR inputs are becoming more popular and provide a professional quality of wiring. XLR inputs allow
the use of fully balanced or quasi balanced signals from preamplifiers, CD players and other ancillary
equipment to be fed directly to the amplifier.
The technical advantages of this system of wiring may be fully realised here because of the dedicated
"BALANCED" input circuit facilities provided. Input XLR sockets are provided for the termination of
each left and right channels.
To Next Page
Loading...
