Plockmatic Bm 2000 Service Manual

20 September 2006, Rev 0.01
3-4
3.2.2 REQUIRED TOOLS
Open wrenches:
5.5, 7, 8, 10 and 13 mm. 19/24 mm comes with the machine.
Allen keys:
1.5, 2, 2.5, 3 and 4 mm.
Torx T-20 (TX20).
Metric Sliding calliper.
SPECIAL TOOLS AND LUBRICANTS
3.2.3 SYMBOLS USED IN TEXT
Screw: Nut:
E-clip:Allen screw:
Connector:
Washer:
Use a Screwdriver:
Spring:
Go to section:

Plockmatic Bm 2000 Specifications

General

Brand	Plockmatic
Model	Bm 2000
Category	Booklet makers
Language	English