What to do if Plockmatic Booklet makers says 'Load covers'?
If the Plockmatic Booklet maker displays 'Load covers' because the paper bin is running low or empty, reload the paper bin according to section 2. Making Booklets.
Why is my Plockmatic Booklet maker double feeding?
If your Plockmatic Booklet maker is experiencing a double feed because more than one cover was fed from the cover bin, check cover loading according to section 2. Making Booklets. If covers are thick, with dark print or mixed prints, turn off double sheet detection according to section 3. Tools.
How to fix 'Check staples' error on Plockmatic Booklet makers?
When the Plockmatic Booklet maker displays a 'Check staples' message, it could be due to several reasons: * If a staple cartridge is empty, replace it according to section 1. Basics. * If staple cartridges are OK, ensure the number of sheets is within specifications. If not, remove the set and verify. * If staple cartridges are OK and the set is within specifications, remove the set and check the stapler head according to section 1. Basics.
How to troubleshoot misfeeds in Plockmatic Booklet makers?
If your Plockmatic Booklet maker is misfeeding, check cover loading according to section 2. Making Booklets. If the problem persists, clean the separator pad according to section 7. REMARKS.
What to do if Plockmatic Booklet makers shows 'Trim bin full'?
To resolve the 'Trim bin full' error on your Plockmatic Booklet maker, empty the trim bin and remove loose trim strips from inside the Trimmer.
General| Max Booklet Size | A4 |
|---|---|
| Booklet Size | A5 to A4 |
| Speed | 3000 booklets/hour |
| Stapling | Yes |
| Dimensions | 1200 x 800 x 1000 mm |
| Weight | 150 kg |
| Paper Capacity | 500 sheets |
| Paper Weight | 60-220 g/m² |
| Maximum Sheet Capacity | 25 sheets |
| Output Capacity | 100 booklets |
| Stitching Positions | 2 |
| Power Requirements | 230V, 50Hz |
| Max Booklet Thickness | 25 sheets (100 g/m²) |
Illustrates and labels the main physical parts of the Booklet Maker unit.
Shows and labels the parts of the optional Trimmer unit.
Details and labels the parts of the optional Cover Feeder unit.
Procedures for connecting and disconnecting the Booklet Maker from the copier.
Instructions for turning the Booklet Maker and connected options on and off.
Guide to replacing staple cartridges and servicing the stapler head.
Steps for removing and emptying the trim bin.
How to adjust paper size, stapling, trimming, and cover feeder settings.
Procedures for setting custom paper dimensions for booklet production.
How to enable or disable the stapling function for booklets.
How to enable/disable trimming and adjust the cut margin.
Instructions for enabling the cover feeder and loading covers.
Explains how to operate the booklet maker in connected or standalone modes.
Steps to start booklet production when connected to the copier.
How to navigate to and use the system's utility settings.
How to change measurement units and display language.
How to check software versions and adjust the air separation fan speed.
How to enable or disable double sheet detection for reliable feeding.
Information regarding password-protected access for authorized service personnel.
Procedures for saving and managing up to 10 different job settings.
How to load previously saved job configurations.
Steps for clearing paper jams within the Booklet Maker unit.
Procedures for clearing jams in the input and exit areas of the Trimmer.
How to clear jams in the vertical transport area of the Cover Feeder.
Explanation of error messages and fault codes displayed by the system.
Troubleshooting for common issues like staple errors, trim bin full, and cover feeder problems.
Essential guidelines and warnings for safe operation and maintenance.
Recommendations for selecting a suitable location and environment for the machine.
Guidelines for safely connecting the equipment to a power source.
Instructions for cleaning feed rollers and the paper separator pad.
Detailed technical specifications for the SR90 Booklet Maker.
Technical specifications for the optional Trimmer TR90.
Technical specifications for the optional Cover Feeder CF90.
To Next Page
