Plockmatic SR90 User Manual

33
4. Jobs
Storing and deleting jobs
Select an already stored job by pressing the [Next]
button. Then press the [Change] button.
Select the option you want to change with the [arrow]
button and then press the [Change] button. See section
2. Making Booklets for how to set up each separate
option.
After changing the options press the [OK] button to
accept the changes you just made.
Continued on next page.
The booklet maker has a maximum storage capacity of 10 different jobs. It is not possible to
delete jobs, therefore when you need to store a new job, an old job must be overwritten. To
make temporary changes in the actual job settings or temporary changes of a stored job, see
section 2 Making Booklets.
Storing a new Job
To store a new job or add new settings to an existing
job you need to start from the Jobs screen. From the
ready screen press the [Jobs] button to enter the Jobs
screen.

Plockmatic SR90 Specifications

General

Max Booklet Size	A4
Booklet Size	A5 to A4
Speed	3000 booklets/hour
Stapling	Yes
Dimensions	1200 x 800 x 1000 mm
Weight	150 kg
Paper Capacity	500 sheets
Paper Weight	60-220 g/m²
Maximum Sheet Capacity	25 sheets
Output Capacity	100 booklets
Stitching Positions	2
Power Requirements	230V, 50Hz
Max Booklet Thickness	25 sheets (100 g/m²)