39
6. Troubleshooting
Fault codes
When there is a misfeed or fault condition in the booklet maker system, a message will be
displayed on the booklet maker. In case there is a problem that can be rectified by the
operator, a fault code and an explanation will be displayed.
Fault codes that can be rectified by the operator:
Booklet maker: BM-201 to BM-210 and BM-401
Trimmer: TR-201 to TR-204 and TR-401
Cover feeder: CF-201 to CF-205, CF-401 and CF-501
Note
If procedures in this manual do not rectify the problem an authorized technician will be
needed.
General fault codes
Misfeed
In general, fault codes indicate a misfeed condition.
When a misfeed occurs, the message “Clear
Misfeed(s)”, a code and the jam area will be displayed.
See section 5. Clearing Misfeeds, for how to clear a
misfeed.
To Next Page
Loading...
