Morgana PowerSquare™ 160 User Manual 1
CHAPTER 1 Introduction to the
PowerSquare 160
Thank you for choosing the Morgana PowerSquare™ 160.
Your Manual
This manual is intended for operators who have been trained on the use of the
Morgana PowerSquare™ 160.
Operator training is given when the PowerSquare 160 is installed. To make sure
you use your PowerSquare 160 correctly, read your manual.
The Morgana PowerSquare™ 160 User Manual describes how to do these
tasks.
• Operate the Morgana PowerSquare™ 160
• Find and correct error conditions
• Do normal maintenance tasks.
In this manual the ‘Morgana PowerSquare™ 160’ is referred to as the
‘PowerSquare 160’.
The ‘P2T Two Knife Trimmer’ is referred to as the ‘Side-Trimmer’.
Safety Information
Safety information is included in the separate “User Safety Manual”.
Read the safety information before you use your PowerSquare 160.
This equipment is not suitable for use in locations where children are likely to be
present.