Ploom S 2.0 - Page 29

28
PS2_0001 [EN]
The remaining time is
indicated by the Status
Indicator LEDs.
Start of Use
When there are only
about 30 seconds
or two pus left, the
device vibrates once to
alert you that the heater
will shut o soon.
• If you want to stop using the device in the
middle of a session, shut it o correctly
according to the procedure under “To stop
using the device in the middle of a session
(shutting the heater o)” (Page 31).
• Even when there is plenty of time remaining,
if there are only two pus left, the LEDs will
flash and the device will vibrate.
About 30
seconds left/
About 2 pus
left (the LED
flashes)
Alerts before Heater Shutdown