39
PS2_0001 [EN]
The “Taste Accelerator” setting
cannot be changed.
• Press the Action Button three times in
quick succession. The setting will not
change if you do not press the Action
Button quickly enough.
• The “Taste Accelerator” setting will not
change in the following cases.
– The Sliding Cover is open, and the Mode
Indicator LED is turned o.
– The first Status Indicator LED is flashing
rapidly. (You cannot heat up any
tobacco sticks.)
When you close the Sliding Cover,
the device vibrates.
The device vibrates twice to alert you that
the heater has shut o.
Never remove a tobacco stick while the
heater is operating. When you stop using
the device, make sure that the heater is
shut o (all of the Status Indicator LEDs are
turned o). Then, remove the tobacco stick
and close the Sliding Cover.
To Next Page
Loading...