Blade Sharpening
IMPORTANT: Replace any blade that is worn,
cracked or damaged.
IMPORTANT: Sharpen every tooth evenly so the
blade rotates smoothly. If you sharpen a blade with
a grinder, do not overheat the blade, and do not
quench a hot blade in water to cool it.
Four-tooth Blade
Sharpen with a single-cut flat file.
Eight-tooth Blade
Sharpen with a single-cut flat file and a round file.
Storage
Please see HONDA ENGINES Owner’s Manual.
1. Perform all regular maintenance procedures and any repairs.
2. Store the Trimmer/Brushcutter in a dry place away from excessive heat, sparks or open flame.
Troubleshooting
Please see HONDA ENGINES Owner’s Manual.
If further assistance is required, contact your local authorized PLP service dealer.
2-3 mm
10 mm
1.5-2.5 mm Radius
7-8 mm
Ei
To Next Page
Loading...
