PLP BCH25 - Table of Contents

Foreword
This Owner’s/ Operator’s Manual is designed to familiarize the operator with the various features and
component parts of the equipment and to assist you with the assembly, operation and maintenance
of your new Trimmer/ Brushcutter.
It is essential that any operator of this Trimmer/ Brushcutter reads and understands the contents this
manual before using the Trimmer/ Brushcutter.
For additional assistance, contact any local authorized PLP dealer.
Contents
Page
Foreword
……………………………………………………………………………………………… 1
Safety Instructions
…………………………………………………………………………………… 2
Operator Safety
………………………………………………………………………………… 2
Trimmer/Brushcutter Safety
……………………………………………………………………… 2
Fuel Safety
………………………………………………………………………………………… 2
Trimmer/Brushcutter Operating Safety
………………………………………………………… 3
Safety and Instruction Decals
…………………………………………………………………… 4
Product Description
…………………………………………………………………………………… 4
Assembly
……………………………………………………………………………………………… 5
Assembling Engine and Drive Shaft Assembly
………………………………………………… 5
Handle Installation
………………………………………………………………………………… 5
Connecting Throttle Cable
……………………………………………………………………… 6
Connecting Stop Switch wires
…………………………………………………………………… 6
Installing Guard
…………………………………………………………………………………… 6
Installing Cutting Attachments
…………………………………………………………………… 7
Attaching Shoulder Harness/ Strap
…………………………………………………………… 8
Before Operation
…………………………………………………………………………………… 8
Oil and Fuel
……………………………………………………………………………………… 8
Starting and Stopping
…………………………………………………………………………… 9
Idle Speed Adjustment
…………………………………………………………………………… 9
Trimmer Operation
………………………………………………………………………………… 10
Trimmer Operating Position
…………………………………………………………………… 10
Cutting with Nylon Trimmer Line
……………………………………………………………… 11
Brushcutter Operation
……………………………………………………………………………… 12
Brushcutter Operating Position
………………………………………………………………… 12
Cutting Direction
………………………………………………………………………………… 13
Cutting Blades
…………………………………………………………………………………… 14
Maintenance
………………………………………………………………………………………… 14
Gearcase
………………………………………………………………………………………… 14
General Cleaning and Tightening
……………………………………………………………… 14
Blade Sharpening
………………………………………………………………………………… 15
Storage
………………………………………………………………………………………………… 15
Troubleshooting
……………………………………………………………………………………… 15
Specifications
………………………………………………………………………………………… 16
─
1
─