EasyManua.ls Logo

Plum ecoSTER 200 - Safety and Precautions; Safety; Applied Symbols; WEEE Directive Compliance

Plum ecoSTER 200
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
1. Safety
Incorrect electrical connection of the room
panel with ecoMAX regulator can cause
damage both to the ecoSTER200 room panel
and ecoMAX regulator. Therefore, installation
has to be done by a qualified installer.
Additional protective measures should be
taken in order to prevent results of
malfunction of the regulator or of errors in its
software which could result in a loss of
property or other dangerous consequences,
i.e. freezing of water in hydraulic system.
2. Purpose
EcoSTER200 room panel is a modern
electronic device mainly used as a
programmable room thermostat. The
regulator provides very simple and effective
way to control indoor temperature.
Temperature sensor included in the regulator
enables reading and programming
temperature with the accuracy of 0,1°C.
Regulator can be programmed in a 7-day
cycle with the accuracy of 0,5 hour.
Therefore, there is a possibility of 48
temperature changes per day. User can
preset different time zones for each day of
the week.
After connecting two additional temperature
sensors, the ecoSTER200 room panel
provides temperature control in three
independent rooms.
The ecoSTER200 room panel also has a
function of additional panel for boiler
regulator control.
It can be used in household and similar
facilities, as well as in slightly industrialized
facilities.
3. Information about documentation
The ecoSTER200 room panel manual is a
supplement for the corresponding ecoMAX
regulator. In particular, except for this
manual, the regulator manual should also be
observed. We are not responsible for any
damages caused by failure to observe these
instructions.
4. Storage of documentation
This assembly and operation manual, as well
as any other applicable documentation,
should be stored diligently, so that it was
available at any time. In the case of moving
or selling the device, the attached
documentation should be forwarded to the
new user/owner.
5. Applied symbols
In this manual the following graphic symbols
are used:
- useful information and tips,
- important information; failure to
observe these can cause damage of
property, threat for human and
household animal health and life.
Caution: the symbols indicate important
information, in order to make the manual
more lucid. Yet, this does not exempt the
user and installer from the obligation to
comply with requirements which are not
marked with graphic symbols!
6. WEEE 2002/96/EC Directive
Act on electrical and electronic
equipment
Recycle the product and the packaging
at the end of the operational use
period in an appropriate recycling
plant,
Do not dispose of the product together
with normal waste,
Do not burn the product.