Plum eSTER x80 - Technical Data; Storage and Transport Conditions

18
13. Technical data
Wireless room panel
power supply
5..12V DC – from the
external power supply
or socket of the main
controller
Radio module power
supply
5…12 VDC - directly
from the main
controller socket
Current collected by the
wireless room panel (at
12 VDC power supply)
0,15 A
Degree of protection for
the wireless room panel;
radio module
IP 20; IP 40
Relative humidity
5…85% without steam
condensation
Working temperature of
the wireless room panel
and radio module
5..35C
Storage temperature of
the wireless room panel
and radio module
-10..60C
Communication
Bi-directional ISM
radio communication
The band of radio
transmission
ISM 868 MHz,
(the band 865…868
MHz)
Transmission power of
the wireless room panel
and radio module
20 mW (+13 dBm)
Radio network topology
One radio module and
many subordinate
room panels
Display
Graphic 480 x 272
pix., with touch screen
Dimensions
Room panel:
148 mm x 97 mm x
23 mm
Radio module:
70 mm x 50 mm x 7,7
mm
Weight wireless room
panel; radio module
0,2 kg; 0,16 kg
Standards
PN-EN 60730-2-9
PN-EN 60730-1
Software class
A
The module and wireless
room panels installation
method
On the wall
Composition of the set: eSTER_x80 wireless
room panel and ISM_xSMART radio module.
14. Storage and transport conditions
The wireless room panel and radio module
must not be exposed to the direct influence
of atmospheric conditions, i.e. rain and sun
rays, and vibrations higher than typical
during road transport. Storage and transport
temperature should not exceed -10…60°C.
Revision history: