INSTALLATION
C-4
MacR6-Z0 – USER MANUAL
Delivered devices may have the display turned off. That is the storage mode in order to save the battery
energy. Turning on the device is able by placing the magnet (i.e. OptoBTEx head) to the OPTICAL INTERFACE window.
This will cause showing the "SLEEP 3" information on the display. All of indicators on the left side of the display will
flash, and then they will be shutting down in a row. Repeated magnet closing before the indicators disappearing will
result the "SLEEP 2" information on the display, next "SLEEP 1" and "START" - after the indicators shutdown the
device will turn on. Correct execution of this action is shown in form of movie under the QR code.
To Next Page
Loading...
Need help?
General