INSTALLATION
C-5
MacR6-Z0 – USER MANUAL
DEVICE ASSEMBLY
MacR6-Z0 data logger is the device designed for installation in hazardous explosive zones 0, 1, 2.
Connecting external antenna cable is allowed only out of the explosive zone.
Antenna socket should be covered by special sleeve attached to the antenna cable.
Minimum requirements for improving the safety and health protection of workers potentially at risk
from explosive atmospheres are prescribed in Directive 1999/92/EC of the European Parliament
and of the Council of 16 December 1999 (ATEX 137 'Worker Protection Directive').
Installation enviroment must guarantee the strong GSM network signal of the vendor whos SIM
card is used in MacR6.
To Next Page
Loading...
Need help?
General