Plum MacR6-Z0 - Page 33

INSTALLATION
C-18
MacR6-Z0 – USER MANUAL
• In MacR6-Z0-P connect the recorders blue pulse input cable with the pulse input plug coming from
the gas meter or with external pulse emitter.
Wire colour
Signal
Green
Pulse input DI1+
Brown
GND
Yellow
Tamper switch DI2+/TS*
White
GND
* gape between TS and GND causes an alarm
If external pulse emitter is equipped with unchangeable cable it is required to connect it with
recorders pulse input cable using Ex junction box according to EN 60079-14.