SETTINGS
D-12
MacR6-Z0 – USER MANUAL
REGISTERED DATA
Depending on variant the device can save in non-volatile memory parameters like:
• Counters and increments of gas volume and energy
• Pressure
• Temperature
Saving data frequency is determined by the Registration period parameter. Data registered by the
device is stored in the device for 1 year. Complete readout is able by optical interface.
Automatic time change (winter-daylight saving and the opposite) occurs the uncontinuous in the
registered data. Change from daylight saving time to the winter causes two registered samples e.g. from
2am with different registration indexes. Automatic time change can be blocked by setting Time Auto
Change parameter to support only winter or daylight saving time.
Instead of registered data, the recorder saves also hourly counter value. Also this data is stored for
one year, and the readout is able by the optical interface.