SETTINGS
D-19
MacR6-Z0 – USER MANUAL
Communication protocol,
firmware and hardware
version presentation.
IP address acquired from the
APN network.
ICCID number of installed
SIM card.
Battery replacement
procedure.
Autotest procedure required
after installation - data
sending to server.
Dynamic GSM signal control
procedure (CSQ test).
Estimated time to pass - 1
minute.
Forced data sending - from
the beginning of the month.
Value of measured pressure
by internal pressure sensor.*
Exit the Service Menu - no
option, returning to the normal
device state.
* - option available only in devices with integrated pressure sensor i.e. MacR6-PT (MacR6-Z0)