How to troubleshoot Plustek SmartOffice PL806 not connected to computer?
If the Plustek Scanner is not connected with the computer, check all physical connections and ensure the scanner power is switched on.
What to do if there is a paper jam in the ADF of my Plustek SmartOffice PL806?
If you have a paper jam in the ADF of your Plustek Scanner, remove any unjammed documents first. Then, open the ADF cover and gently pull the jammed documents out. Make sure to close the ADF cover securely afterward.
What to do if there is a paper jam in the Plustek Scanner ADF?
If the Plustek Scanner experiences a paper jam in the ADF, remove any unjammed documents. Then, open the ADF cover and gently pull out the jammed documents.
Details software requirements for scanner installation.
Outlines the necessary hardware for scanner connectivity.
Instructions on how to unlock the scanner's scanning head.
Explains scanning using the TWAIN interface with bundled software.
Steps to check physical connections and software status for scanner connectivity issues.
To Next Page
General