Unpack and Assemble
Note: The Pad Module (No. 9) is a consumable part,
you need to replace it after 20000 scans.
1. Remove all packing materials.
2. Open cover and remove all packing material.
Close the cover until you hear it click into place.
3. Pull up paper chute extension and install paper
stacker.
Connect and Install Software
1. Connect scanner to computer.
2. Insert Setup/Application disk into DVD-ROM
driver.
Note: If your computer does not have
a DVD-ROM please download driver
from Plustek website.
www.plustek.com Support &
Downloads Drivers & Downloads
Search for PS30D
3. Follow on-screen instructions to install all
software.
4. Check if scanner monitor displays No.1 or check
system tray for successful installation.
For Windows OS
For Mac OS
Scan a Document
1. Fan documents
At an angle
Feed direction
2. Place documents in scanner
Back
3. For Windows OS:
Click Windows Start button to launch DocAction.
For Mac Os:
Double click MacAction icon in dock.
SmartOfce PS30D
Quick Start Guide
Please read this guide before using your scanner.
P/NO.: 17-07-2BB5061-C
2
3
1
For product detailed information, please visit:
Scan me
For software video tutorials, please visit:
Scan me
Please scan the QR code in the title bar to see more software video tutorials.
Please use the AC adapter, and the USB cable provided with the scanner.
1 2 3
To Next Page
Need help?
General