What to do if there is a paper jam in the ADF of my Plustek Scanner?
To resolve a paper jam in the ADF of your Plustek Scanner, first, remove any documents that haven't jammed. Then, open the ADF cover by gently pulling it. Carefully but firmly extract the jammed documents. Finally, close the ADF cover by pushing it down until it clicks into place.
Essential safety guidelines to prevent damage to the device and ensure user safety during operation.
Lists the minimum hardware and operating system specifications required to use the scanner.
Details software needs, hardware requirements, and USB connectivity.
Instructions for connecting the scanner to the computer via USB or Ethernet.
Step-by-step guide for installing software, drivers, and performing calibration.
Procedures to verify scanner functionality using flatbed and ADF scanning methods.
Instructions for cleaning the scanner's glass, ADF, and using appropriate materials.
Steps to check and resolve issues related to scanner connectivity with the computer.
To Next Page
General