13
INSTALLATION
WARNING! Use suitable protection and follow the
recommendations in the Safety Information enclosed and
provided by material suppliers when installing or working
with the Proportioner.
CAUTION! Inside the console is a Terminal Strip for
connecting the main power (wire not supplied) to the
PH Series Proportioner. This electrical connection
must be made only by a qualified electrician.
CAUTION! Make sure the power cable is disconnected from the main
power source before connecting to the Terminal Strip in the Console.
NOTE! To ensure the PH Series Proportioner works correctly, the electrical
supply must meet the specifications indicated on the Serial Number
Placard affixed to the Electrical Console.
To Next Page
Loading...
