EasyManua.ls Logo

Pocketbook SURFpad 2 - Firmware Update Procedures; Automatic Update; Manual Update Procedures

Pocketbook SURFpad 2
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Firmware Update
Official firmware updates for the Device are published on the offi-
cial PocketBook website (www.pocketbook-int.com/us). Installation
of official firmware updates is recommended, as they contain fixes
and additions improving the efficiency of the Device.
Official firmware updates do not influence the warranty conditions.
The warranty does not cover software installed from sources other
than the official PocketBook website.
You can update firmware in several ways.
ATTENTION! Please, make sure the Device is fully charged before updating
the firmware to avoid discharge during update process! This may cause severe
damage of the Devices software.
AUTOMATIC UPDATE
Your Device should be connected to the Internet for this update variant.
1. Enter Settings > System > About device > System updates section.
2. If you’d like the Device to check for updates automatically, check
Enable or disable autoupdate checkbox
3. To check for updates immediately, press Check for the new firmware now.
If firmware updates are available, the Device will automatically
download and install them.
ATTENTION! Sometimes a complect of several programs is stored in one pbi
package. To install them after firmware update, please, accept an offer of the
pbi package installation wizard (if it appears automatically) or launch the in-
stallation file from the ‘File Manager’ (see more detailed about pbi packages in
the PBI Packages Support section).
MANUAL UPDATE
Variant 1
1. Download to your PC firmware version you’d like to install (www.
pocketbook-int.com/us/support/pocketbook-surfpad)

Related product manuals