Getting Started 22
will turn to the same as Network name (SSID). If you’d
like to change connection name (for example, Home
or Ofce) enter it as you’d like it to be displayed on
the Device
NOTE Connection name eld species only the display
name of the connection. For correct communication Net-
work name (SSID) must be the same as network transmits
4. Select security type in the corresponding list:
• None – for open network
• Simple (WEP) – after you select this option,
you will need to specify WEP Authentication
type – Open System or Shared Key either. The
Device cannot recognize authentication type
automatically
• WPA/WPA2 Enterprise – you will need to
specify username, password and domain (if
necessary)
To Next Page