Getting Started 23
• WPA/WPA2 PSK – you will need to enter
network key (up to 64 symbols)
5. Select the idle time before disconnection in
the corresponding section
6. By default Network settings are set to DHCP
(dened by network). If it’s needed to congure net-
work settings manually, go Network settings, change
IP address conguration to Manual and enter network
conguration from on-screen keyboard
7. If the network you need to connect to has a
proxy server, you can specify its parameters in Proxy
conguration section
8. To check network conguration press Test
connection.
You can select one of pre-congured connections to
be used by default. To proceed, select Preferred con-
nection and select one from the list.