USING YOUR DISHWASHER
Before using your dishwasher:
Inside Outside
1. Set the water softener
2. Loading the salt into the softener
3. Loading the basket
4. Fill the dispenser
NOTE:
Check the section “Water Softener”If you need to set the water softener.
Loading The Salt Into The Softener
NOTE:
If your model does not have any water softener, you may skip this section.
Always use salt intended for dishwasher use.
The salt container is located beneath the basket and should be filled as
explained in the following:
WARNING
Only use salt specifically designed for dishwashers use!
Every other t
ype of salt not specifically designed for dishwasher use,
especially table salt, will damage the water softener. In case of
damages caused by the use of unsuitable salt, the manufacturer does
not give any warranty nor is liable for any damages caused.
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine for any period of time,
which may cause corrosion.
To Next Page
Loading...
