EasyManua.ls Logo

point PTDW1 - Installation; Electrical Shock Hazard Warning; Professional Installation Recommended; Installation Preparation and Positioning

point PTDW1
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
WARNING
Electrical Shock Hazard
Disconnect electrical power before installing dishwasher.
Failure to do so could result in death or electrical shock.
Attention
The installation of the pipes and electrical equipments should be done
by professionals.
Installation preparation
The installation position of dishwasher should be near the existing
water inlet tap and drain outlet and power socket.
One side of the cabinet sink should be chosen to facilitate the
connection of drain hoses of the dishwasher.
Positio
ning the dishwasher
Position the dishwasher in the desired location. The back should rest
against the wall behind it, and the sides, along the adjacent cabinets
or wall. The dishwasher is equipped with water supply and drain hoses
that can be positioned to the right or the left to facilitate proper
installation.
About Power Connection
WARNING
For personal safety:
Do not use an extension cord or an adapter plug with this
dishwasher.
Do not, under any circumstances, cut or remove the ear
thing
connection from the mains power cable.
Electrical requirements
Look at the rating label to know the rating voltage and connect the
dishwasher to the appropriate power supply. Use the required fuse
10 amp, time delay fuse or circuit breaker recommended and provide
separate circuit serving only this appliance.
28

Related product manuals