Polaris 2001 90 SPORTSMAN 90 - Page 57

ENGINE
2.25
ENGINE ASSEMBLY
29. Install carburetor and tighten the carburetor adaptor
screw to specification.
30. Install air duct to carburetor.
31. Install starter motor. Torque bolts to specification.
32. Install fan. Torque fan bolts to specification.
Carburetor Adaptor Screw Torque:
20 in.lbs. (2.25 Nm)
Starter Motor Bolt Torque:
84 in.lbs. (9.5 Nm)
Fan Bolt Torque:
84 in.lbs. (9.5 Nm)