86
MAINTENANCE AND LUBRICATION
Front Gearcase Oil (600/700)
The front gearcase lubricant level should be checked every six months
or 1000 miles (1600 km), whichever comes first. Front gearcase oil
should be changed annually. We recommend the use of Polaris
Premium Hub Drive Fluid. See page 121 for the part numbers of Polaris
products.
Oil Check
1. Position the ATV on a level surface.
2. Remove the fill plug (1) and view the
oil level. Maintain the oil level even
with the bottom of the fill plug hole.
3. Add the recommended gearcase oil as
needed.
Oil Change
1. Position the vehicle on a level surface
and remove the fill plug.
2. Place a drain pan beneath the gearcase, remove the gearcase drain
plug located on the bottom right-hand side, and drain the oil.
3. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
4. Add 5 ounces (150 ml) of Polaris
Premium Hub Drive Fluid.
5. Reinstall the fill plug and check for leaks.
1
To Next Page
Loading...
Need help?
General
