4.4
ELECTRONIC FUEL INJECTION
Digital Wrench™ Diagnostic Software - PU-47063
This dealer-only software installs on laptop computers equipped
with a CD drive and serial port connection, and is designed to
replace multiple shop tools often used to test EFI components.
It also includes step-by-step diagnostic procedures to aid
technician repair and troubleshooting.
IMPORTANT: If the PC you are using is not equipped
with a 9-pin serial port, a USB to serial port adaptor
will be necessary. A USB to serial port adaptor can be
purchased through DSA at: www.diagsys.com
Digital Wrench™ SmartLink Module Kit - PU-47471
This module kit contains the necessary cables and hardware to
communicate between the vehicle ECU and the Digital
Wrench™ diagnostic software. Polaris dealers can also order
the following kit components separately: SmartLink Module
PU-47468, Vehicle Interface Cable PU-47469 and PC
Interface Cable PU-47470. This module kit is used on all 8 pin
connector-based Polaris EFI systems. This kit is available to
Polaris dealers through our tool supplier SPX at (1-800-328-
6657) or http://polaris.spx.com
Digital Wrench™ - Diagnostic Connector
Located under the dash and accessible from the passenger side.
Digital Wrench™ - Download Website
Located at: www.polaris.diagsys.com
PU-47468
PU-47469
PU-47470
To Next Page
Loading...
