Polaris 2008 RZR User Manual

6.11
CLUTCHING
6
Exploded View
Clutch Disassembly
1. Using a permanent marker, mark the cover, spider, and
moveable and stationary sheaves for reference, as the cast
in X's may not have been in alignment before disassembly.
2. Remove cover bolts evenly in a cross pattern and remove
cover plate.
3. Inspect cover bushing (A). The outer cover bushing is
manufactured with a Teflon
 coating. Wear is determined
by the amount of Teflon
 remaining on the bushing.
Washers
Bearing
Spring
Cover
Bearing
Bushing Lock
Washer
Bolt
Flat
Washer
Cover
Screws
Button
Pin
Washers
Roller
Nut
Shift
Weight
Bolt
Non-Braking
Bearing
Spacer
Limiter
Spider
Button
Cover Bushing Inspection:
Replace the cover bushing if more
brass than Teflon is visible on
the bushing. Refer to bushing
replacement in this chapter.
A

Polaris 2008 RZR Specifications

General

Brand	Polaris
Model	2008 RZR
Category	Utility Vehicle
Language	English