112
MAINTENANCE
Suspension Settings
Front/Rear Shock Compression
The compression damping clicker knob is located at the top of the shock
reservoir. When the knob is turned clockwise until it stops, the damping
is in the fully closed position. When turned counter-clockwise until it
stops, the damping is in the fully open position.
1. Turn the clicker clockwise to increase compression damping.
2. Turn the clicker counter-clockwise to decrease compression
damping.
Walker Evans Shocks
Setting Compression Damping
Softest 16 clicks from closed
Factory Front: 5-7 clicks from full counter-clockwise position
Rear: 5-7 clicks from full counter-clockwise position
Firmest 1 click from closed
Front
Rear
Increase
Decrease
Decrease
Increase
To Next Page
Loading...
