48
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating
condition before operating increases the risk of an accident. Always
inspect the vehicle before each use to make sure it's in safe operating
condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 35
106
Brake pads Inspect, replace if damaged 107
Brake fluid Ensure proper level 108
Front suspension Inspect, lubricate if necessary 82
Rear suspension Inspect, lubricate if necessary 82
Steering Ensure free operation 118
Tires Inspect condition and pressure 12
113
Wheels/fasteners Inspect, ensure fastener tightness 113
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 40
85
Coolant level Ensure proper level 97-98
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation -
Indicator lights/switches Ensure proper operation 26-27
Headlights Check operation -
Brake light/taillight Check operation -
Seat latches Push down on both seat backs to
ensure the latches are secure
28
Seat belts Check length of belt for damage,
check latches for proper operation
32
Cab doors Check doors and latches for wear or
damage.
32
Spark arrester Inspect and clean as needed, replace
if damaged
104
To Next Page
Loading...
