EasyManua.ls Logo

Polaris 340 Classic - Start the Engine and Check

Polaris 340 Classic
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
PRE-RIDE INSPECTIONS
Start the Engine and Check
n Transmission: Make sure the reverse is not engaged before
starting your machine.
n Engine Stop Switch: Check the auxiliary shut-off switch for
proper operation. Push down to stop the engine. Pull up to release
and start the engine.
n Lighting Check: Check the headlight (high and low beam),
taillight, and brake light for normal operation.
n Mirror Adjustment: If equipped, adjust your mirrors so they can
be used to their full advantage.
n Check Surroundings to Verify Clear Operating Area
Make sure you have a clear area all around your snowmobile, i ncluding
an area clear of bystanders. Theres always the possibility of some
sideways vehicle movement, of applying a little more throttle than
intended, or of debris being t hrown by the track. If the surrounding
area is clear you before you start, you can devote your full attention to
operating the snowmobile.

Table of Contents

Related product manuals