95
MAINTENANCE
General Maintenance
Drive Chain Tension
To obtain correct chain tension:
1. Rotate the driven clutch
counterclockwise to move all
chain slack to the tensioner
side. Lock the brake lever
lock, or have an assistant hold
the brake lever firmly.
2. Loosen the adjuster bolt jam
nut (A).
3. Fi nger tighten the adjuster bolt
(B) until it can no longer be
adjusted by hand, then back off
1/4 turn.
4. Tighten the jam nut while
holding the adjuster bolt.
5. The chain is now tensioned. Release the brake lever lock.
A
B
To Next Page
Loading...
